*** PLEASE NOTE ***
WE REPRESENT TEKELEC TEMEX - SEE BELOW FOR OUR STOCKED TRIMMERS.
ALL INQUIRIES WELCOME. WE ALSO DO RESONATORS, OSCILLATORS ETC.
**SKY SEIKO TRIMMERS
ALL are dielectric PTFE. Silver plated. Good Q. 2-Pin.
The MCX variety have straight pins, the others are pressfit, which means they
won't fall out if the board to be populated is turned over...
The MCX models are dust protected and are embossed, which leads to more
stability. These are used to 2.5 GHz.
MCX1-5 0.7-5 pF green dust protected Sky pitch 5mm high-Q 2.5 GHz 2.25
TZ03-5 1-5 pF blue Plastic Murata pitch 5mm 2-pin 0.88
RM5-5 1-5 pF blue Dau 0.75
TZ03-15 2-15 pF brown Murata 0.88
TZ03-30 3-30 pF green Plastic Murata pitch 5mm 2-pin 0.88
Ph-RM5 4-40 pF Philips pitch 5 mm 2-pin 0.88
TZ03-50 8-50 pF yellow Murata pitch 5 mm 2-pin 0.88
TZ03-120 12-120 pF black Murata pitch 5 mm 2-pin 1.13
TZB04-3 0.8-3 pF brown SMD 4x4 mm 1.34
UHFSMD-5 0.5-5 pF zwart SMD to 3 GHz, footprint 3.5 mm 1.50
TZB04-6 1-6 pF blue SMD 4x4 mm 1.34
TZB04-10 1.5-10 pF wit SMD 4x4 mm 1.34
TZB04-20 1.8-20 pF red SMD 4x4 mm 1.34
TZB04-25 2.2-25 pF red SMD 4x4 mm 1.34
TZB04-30 2.5-30 pF black SMD 4x4 mm 1.34
TZC03-30 3.0-30 pF green SMD 3x3 mm 1,25
TZB04-50 7-50 pF black SMD 4x4 mm 1.70
NEW: TEKELEC HIGH-Q SMT TRIMMERS dust proof; footprint 3-3.5 mm
Q @250MHz Q @ 500MHz Q @ 750MHz
-------------------------------------
AT0308 3.0-8 pF violet 800 300 100 6.58
AT0320 4.5-20 pF red 300 40 5.33
AT0330 5.5-30 pF orange 180 5.33
AT0340 8.0-40 pF yellow 4.54
Also available the AT13.. range: Footprint 2.5 x 1.8 mm.
These are cheaper but the Q is lower.
**FOIL TRIMMERS 3-PIN VALVO/PHILIPS/DAU
N.B.
Also stocked: 7.5 mm versions above 22 pF
6 pF grey pins 2.5x7.5 mm 7.5 mm diam. A 0.45
10 pF yellow pins 2.5x7.5 mm 7.5 mm diam. A 0.45
13 pF red dot pins 2.5x7.5 mm 7.5 mm diam. A 0.45
22 pF green pins 2.5x7.5 mm 7.5 mm diam. A 0.45
30 pF red pins 2.5x7.5 mm 7.5 mm diam. A 0.68
45 pF violet pins 2.5x7.5 mm 7.5 mm diam. A 0.68
45 pF grey pins 7.5x5.0 mm 10 mm diam. B 1.50
65 pF yellow/white pins 7.5x5.0 mm 10 mm diam. B 0.82
65 pF yellow pins 5.0x 10 mm 10 mm diam. C 1.75
80 pF CDAJ-946 pins 5.0x 10 mm 10 mm diam. right angled ! 1.25
90 pF rood pins 5.0x 10 mm 10 mm diam. C 1.50
110 pF CDAJ-947 pins 5.0x 10 mm 10 mm diam. right angled ! 1.30
"A" "B" "C"
5
o o 10
o o o
2.5 o 7.5 5
o o
7.5 o
**TUBULAR TRIMMERS
KIK516 1.2-6.5 pF 13x5 mm Solder in, pcb model 0.54
1123 0.8-3.5 pF 19x6 mm With rear connection and nut (Valvo) 2.22
PH-BUISTR. 1.0-17 pF 23x5 mm Silver plated, with nut (Philips) 1.25
TRIKO 1.0-10 pF 13x5 mm Solder-in, vert. pcb model, Stettner 0.34
BUIS VERZ. 1.0-10 pF 25x5 mm With nut, silver plated, high-Q 1.13
BUISTR. 0.5-9.0 pF 20x5 mm High Q, solder in, heavily silver plated,
ideal for cavities, filters etc. 1.70
**MICROWAVE TRIMMERS
The pcb models can easily be adapted to panel mounting by clipping off the
pins. Suitable nuts can always be ordered extra.
Johanson trimmers are the same as Tekelec, all are gold plated.
In addition to the models listed below we have small quantities of other
values in stock.
Most include a dustcap, nuts are included on request- free of charge.
Johanson 5301 Q=5000 0.8-10pF multiturn gold plated air w/.nut and dustcap 7.50
Johanson 26273 Gigatrim gold plated 0.6-4.5pF Q=3000 little tube,
8 turns adjustment 3.90
Tronser Gold plated tubular trimmer (Johanson) 60-0720-15005-000
0,7-5pF 500V incl. gold plated nut M6x0,35 Q=6000 2.90
Tekelec-5501 Gold plated tubular 1-20pF with nut and dust cap 5.40
Tekelec-8050 Small tubular diam. 5 mm 0.8 - 6 pF 10.44
Tekelec-5801 Miniature tubular diam. 3 mm 0.6 - 3.5 pF with gold nut 13.50
Gold nut for Johanson/Tekelec tubulars.
Note- these trimmers are often soldered in place 0.57
Johanson 1.5kV tubular trimmer gold plated 10 pF 15.88
Glass trim. Tekelec gold plated 1-19pF, power 25x8 mm. with nut 4.54
UKT7-8203 Silver plated porcelain tubular 0.5-2.5 pF 2KV w.nut 20x6mm 2.27
-------
Kyocera Surface mount RM=2 long pins 2-40 pF 0.23
**AIR SPACED TRIMMERS WITH VANES "TRONSERS"
Tronser 3,5-7-9-12.5-15-17-30 pF 1.79
Minitronser Small vert.adjust 1-10pF 1.79
Tronser Rather large pitch 12.5 mm 12 pF OK for some power 1.93
Tronser same, even heavier 24 pF 4.90
Tronser Straight with nut fixing 35 pF ex-equipment 1.36
**COMPRESSION TRIMMERS ARCO HIGH POWER
Nr.1543 2-11 pF 14x9 mm. 5.40
Nr.402 3-20 pF 14x9 mm. 7.90
Nr.403 5-30 pF 14x9 mm. 5.40
Nr.40P 7-40 pF 22x16 mm. with short spindle and mount 2.50
Nr.461 3-40 pF 20x15 mm. 5.40
Nr.404 8-65 pF 14x9 mm. 5.40
Nr.462 10-80 pF 20x15 mm. 5.40
Nr.406 25-115 pF 14x9 mm. 5.40
Nr.423 16-100 pF 20x10 mm. 5.40
Nr.463 20-180 pF 20x15 mm. 5.40
Nr.426 50-250 pF 20x10 mm. 5.40
Nr.464 45-280 pF 20x15 mm. 5.40
Nr.428 95-350 pF 20x10 mm. 5.40
Nr.465 75-380 pF 20x15 mm. 5.40
Nr.466 105-480 pF 20x15 mm. 9.50
Nr.429 115-400 pF 20x10 mm. 5.40
Nr.468 175-680 pF 20x15 mm. 6.31
Nr.469 210-790 pF 20x15 mm. 6.31
**PHILIPS PTFE TRANSPARANT POWER TRIMMERS
809 series high-temperature ptfe.
2222.809.05215 3,5pF oranje 2-pin RM 5 1.50
2222.809.05216 10 pF white 2-pin RM 5 1.32
2222.809.05217 20 pF red 2-pin RM 5 1.13
2222.809.06002 45 pF yellow 3-pin RM 5x7.5 2.25
2222.809.08003 60 pF blue 3-pin RM 5x7.5 6.78
2222.809.07011 60 pF blue 4-pin case 14x12 mm 6.78
2222.809.07015 100 pF 4-pin case 14x12 mm 6.78
2222.809.07107 150 pF 4-pin case 14x12 mm 7.94
Rond 80pF pink 3-pin case 10 mm 1.59
**MISC. TRIMMERS
Transonic Hi-Q cer.trimm. 20pF RM=5mm, lange fins, low profile 0.57
Stettner Ceramic pcb model 12pF 10mm round 3-pin 0.23
Stettner same 20pF 7mm round 3-pin 0.45
Stettner same 40pF 10mm round 3-pin 0.45
Trimmer Ceramic 3-pin 5x7.5 mm. 25 pF 0.68
Traptrim Trapezoid smt trimmer no pins solder-in 10 pF 0.27
Jackson Tetfer VHF 10-turn trimmer 1-10 pF silver plated 0.79
Marconi Instrumentation trimmer with nut nice and shiny
1.2-9 pF L=12 mm 2.25
1.8-16 pF L=18 mm 2.25
Philips Bucket form concentric trimmer, 30 pF 3.58