***** SMD STORAGE BOXES (plastic)
Box-130 130 rectangular tubes with lids, pressed into foam, with legend 27.13
ALSO IN OUR PROGRAM FILLED BOXES- RESISTORS, CAPACITORS, INDUCTORS BUT
LABKITS (INCL. POPULAR SMD TRANSISTORS, DIODES, TRIMPOTS ETC. TOO !
THERE ARE SOME 50 DIFFERENT BOXES, FOR HOME ENTHOUSIASTS AND LAB USE ALIKE;
PLEASE CALL.
***** PCB BOARDS *****
**********************
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ HOW TO APPLY A PHOTO SENSISTIVE LAYER ON A BOARD: +
+ +
+ 1. Preheat the oven to 150 degrees Cent. and switch off +
+ 2. Even spraying with Positiv 20 by Kontakt Chemie +
+ 3. Dissolve some sink blockage removal fluid (caustic soda) in a tray
+ of warm water
+ 4. Insert the board and gently stir from time to time +
+ 5. As soon as it feels "greasy" the board is ready +
+ +
+ (met dank aan Jasper in Alkmaar) +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Very thin double sided coper clad board 230 x 240 x 0.4 mm 2.20
Euro epoxy 1.5mm double- or single sided 10x16 cm 1.13
Double thick (3.2 mm) double sided epoxy board, ideal for "hot" circuits,
panel size approx. 25 x 43 cm 22.64
Single sided copper clad board 1.5 mm first quality 53,3 x 17,2 cm 3.90
PTFE BOARDS- COPPER CLAD 35µ
----------------------------
cut to your specifications:
PTFE diss.faktor=2.20 or 1.13 (your choice) double sided,
079mm (0,141") per cm² 0.16
Rogers substrates:
RT Duroid 5870 0,031" (0,79 mm) Er=2.33
(we have several cutoffs of the above)
Lab board 10 x 16 cm drilled 0,1" raster (strips) 4.54
Lab board 10 x 16 cm drilled 0,1" raster islands (non connected pads) 4.54
Lab board 10 x 16 cm drilled 0,2" raster islands (non connected pads) 4.54
Small drilled board 5 x 8 cm non connected pads 1.02
same, full strips 0.88
Pertinax exp. board no copper drilled 10 x 16 cm 1.32
NEW! SMD BOARDS AND CONVERSION BOARDS
-------------------------------------
Dimensions 10 x 16 cm, Epoxy, drilled and tinned.
Type 2 Universal matrix for IC's, transistors and passives 7.90
Photo sensitive:
================
Single sided low cost:
10 x 16 cm substrate 1.5 mm 1.79
Single sided epoxy:
10 x 16 cm substrate 0.5 mm 3.58
10 x 16 cm substrate 1.5 mm 3.13
Double sided epoxy:
10 x 16 cm substrate 0.5 mm 4.04
10 x 16 cm substrate 1.0 mm 3.86
10 x 16 cm substrate 1.5 mm 3.58