PHASE DETEKTOR
==============
MPD1 Minicircuits 1VDC out 1-100 MHz (RF1/2) DC-50MHz (I) 22.64
FILTERS
==============
PLP300 Lowpass DC-300 MHz plug-in 8.85
PLP550 Lowpass DC-550 MHz plug-in 8.85
PLP600 Lowpass DC-600 MHz plug-in 8.85
P7LP307 7-pole 10 elements 307 MHz @-3dB 9PIN SIP 11.34
ATTENUATORS
===========
Ma/com AT220 SO16 case attenuator 0-30dB in 2 dB steps max. 2 GHz 4.50
Preh Var. attenuator, very rare now, 60 ohms, BNC, tubular
metal screened case, OK in 50 ohms systems 59.00
Same in 75 ohms 59.00
ZMAS1-SMA Biphase MiniCircuits variable 5-450MHz control=DC-50kHz 69.95
Connector types:
----------------
BNC m/f. FP-50 - 1 dB - 1W - 1GHz 18.11
BNC m/f. FP-50 - 2 dB - 1W - 1GHz 18.11
BNC m/f. FP-50 - 3 dB - 1W - 1GHz 18.11
BNC m/f. FP-50 - 5 dB - 1W - 1GHz 18.11
BNC m/f. FP-50 - 6 dB - 1W - 1GHz 18.11
BNC m/f. FP-50 -10 dB - 1W - 1GHz 18.11
BNC m/f. FP-50 -20 dB - 1W - 1GHz 20.50
BNC m/f. USA used-tested 2W - 3 dB - 1.5 GHz 18.11
BNC m/f. USA used-tested 2W - 6 dB - 1.5 GHz 18.11
BNC m/f. Texscan 2dB 2W 18.11
BNC m/f. Texscan 20dB 2W 22.65
BNC m/f. MiniCircuits CAT20 1W 20.90
SMA m/f. Minicirc."VAT-20W2" new 20 dB-2W gold plated w.heatsink 6 GHz 29.90
SMA m/f. Minicirc."VAT-30W2" new 30 dB-2W gold plated w.heatsink 6 GHz 29.90
SMA m/f. 6 dB DC-2 GHz 1W Mid West Microwave, new 44.92
SMA m/f. 10dB DC-12.4 GHz 1W Mid West Microwave #291, new 52.50
SMA m/f. 10 dB DC-2 GHz 1W Anzac, new 54.00
SMA m/f. MiniCircuits DC - 18 GHz SMA-attenuator 2W 30dB 90.00
SMA m/f. Weinschel 30dB 18GHz ! SMA m/f 39.00
N m/f. Weinschel 1 dB 5W 29.90
N m/f. Microlab 3 dB - 3W - 1 GHz 18.90
N m/f. MiniCircuits NAT3, 3dB - 2W - 2 GHz 18.90
N m/f. MiniCircuits N30W5 DC - 18 GHz N-attenuator 5W 30dB 159.00
TNC/BNC m/f Ma/com, silver plated, new in bag, TNC, 10dB These unique
Attenuators utilize the UniDapt system. They consist of
a TNC male, TNC female and a 10 dB Attenuator.
The Attenuator can be removed from the TNC Unidapters and can
be used with any other type Unidapter.
The assembly is loctited together but with two wrenches and
some muscle they will come apart.
You can also use them as a normal 10dB BNC attenuator with the
two adapters included 19.00
TNC m/f. Microlab FXR-AE-20T 20dB 18.11
Others:
-------
See also under "diodes" for BAR60/61 (SOT143 T/Pi) and TDA1053 (leaded Pi).
PAT1 1dB - in ceramic "MAR" case - DC-7 GHz 7.03
PAT2 2dB - in ceramic "MAR" case - DC-7 GHz 7.03
PAT3 3dB - in ceramic "MAR" case - DC-7 GHz 7.03
PAT6 6dB - in ceramic "MAR" case - DC-7 GHz 7.03
PAT10 10dB- in ceramic "MAR" case - DC-7 GHz 7.03
PAT15 15dB- in ceramic "MAR" case - DC-7 GHz 7.03
PAT20 20dB- in ceramic "MAR" case - DC-7 GHz 7.03
PAT30 30dB- in ceramic "MAR" case - DC-7 GHz 7.03
MAT20 20dB max. 1.5 GHz DIL 6.78
Flange style:
-------------
Florida 3 dB - 20W 29.00
KDI 3 dB - 10W (PPA10) 19.90
Florida 3 dB - 150W 49.90
KDI 6 dB - 10W 25.00
Florida 10 dB - 10W 29.00
Various attenuators:
--------------------
EMC brand attenuators - pads with 3 flaps (T-configuration)
drop in=no massa flapje, mass is the round gold plated drop-in body
pad=rectangualar with 3 flaps. Fmax 8...10 GHz.
PAD-XXX dB 1W- volgende waarden: 1 - 3 - 4 - 6 - 10 - 12 - 16 - 20 dB 4.50
DROP-XX dB 1W- volgende waarden: 3 of 12 dB 4.50
STEP-ATT Texscan panel with 2 BNC linked rotaries, RA70 1-10dB in 1 dB
steps plus RA73 0.1-1dB in 0.1dB steps! (75 ohms) 79.90
STEP-ATT Professional step attenuator (DC controlled) 2-4-8-16 dB so the
minimum is 2 dB and the max. 30 dB- in 2dB steps. DC-1.3 GHz.
SMA sockets 135.68
STEP-ATT Stappenverzwakker with knob 2 GHz 1-10dB in 1 dB steps,
JFW 50R-193, max. 2W, 2 x SMA 135.68
STEP-ATT same, BNC 135.68
MIXERS
======
active:
- - - -
- - - -
FST3125 45dBm 3rd I.P. high level mixer 5.88
IAM81008 (marked M810) lowpower (both Gp=10 dB) 4.54
passive:
-_-_-_-_
(these mixers may be used reverse if that better suits the application,
the IF port becomes the input, the RF port becomes the output. Also, the units
with an IF port suitable from DC is nice for building a spectrum monitor,
sweeped panorama unit etc.)
1N4307 DBM 250 MHz 12x11mm long wires sideways, w/connection diagram 5.90
SME1400B Watkins Johnson SMD 1-2200 MHz ! 25.00
ADE-42MH LO/RF 5-4200 MHz, IF 5-3500 MHz 13dBm SMT 49.00
RMS-2 LO/RF 5-1000 MHz, IF DC-1000 MHz 7dBm =MD4007X 9.90
ADE2-ASK LO/RF 1-1000 MHz, IF DC-1000 MHz 7dBm 22.64
SBL3 LO/RF 20kHz-200MHz IF DC-200MHz 7dBm 40.39
SKY60 LO/RF 2.5-6 GHz IF DC-1.5 GHz 40.61
SBL1 0.5-500 MHz 7dBm DIL original Minicircuits (vacuum) 16.50
SBL1X 10-1000 MHz 7dBm DIL IF=5-500 MHz 24.50
TUF1 600 MHz 12.90
UNCL-X1 1-500 MHz 7dBm load-insensitive 58.54
RMS1 =SBL1 in micro-SMD 7 x 8 mm! 17.20
ASK1 Mixer 1-600MHz DIP6 - special offer !! 9.90
SBL1H =SRA1H 0.5-500 MHz high level 17dBm 27.00
SRA1 same, hi-rel version, vacuum 13.57
SRA11 =SBL11 5-2000 MHz 7 dBm DIL 52.50
RMS11X 10-1900 MHz SMD 20.83
RMS30 200-3000 MHz SMD MF:DC-1000 MHz **NEW TYPE** 22.64
SRA220 0.05-2000 MHz 10 dBm DIL =EMA220 67.61
SRA2000 100-2000 MHz 7 dBm o/p DC-600 59.90
SMD-C2 sold out see SYM 11
SYM11 =SMD-C3 1-2500 MHz SMD Dubus 22.64
SYM1270 SMD 13.57
TFM42MH 10-4200 MHz 13 dBm DIL 83.95
Connector type mixers:
ZLW-1-SMA 0.5-500 MHz IF=DC-500 MHz 7dBm SMA 39.95
ZLW-1-1-SMA 0.1-500 MHz IF=DC-500 MHz 7dBm SMA 40.95
ZLW-1-WSH 5-750 MHz IF=DC-750 MHz 17dBm high level SMA 39.95
ZLW-1H-SMA 0.5-500 MHz IF=DC-500 MHz 17dBm high level SMA 42.95
ZFM-3H 0.05-300 MHz IF=DC-300 MHz 17dBm hi-level BNC 49.95
ZFM-15-BNC 10-3000 MHz IF=10-800 MHz 10dBm BNC 65.95
ZFM-2-SMA 1-1000 MHz IF=DC-1000 MHz 7dBm SMA 39.95
ZFM-2H-SMA 5-1000 MHz IF=DC-1000 MHz 17dBm SMA 49.95
MD-143 Anzac 5-500 MHz DC-500 MHz 7dBm BNC 39.00
**Thousands more on request**